Raymarine hsb2 PLUS Series User Manual
Page 86
3-22
hsb
2
PLUS Series LCD Display
Co
ntro
lli
ng
Gu
ar
d
Zo
ne
Alar
m
s
•
You turn the guard zone off
•
You adjust the guard zone size/shape to reduce the number of targets in the
zone
•
You turn the alarm off
•
You decrease the alarm sensitivity
•
The target leaves the guard zone
➤ To change the alarm sensitivity setting:
1. Press MULTI to display the sliders.
2. Press the ALARM soft key to highlight the Alarm slider.
3. If required, press the soft key again to toggle the setting between OFF and
ON. You can only move the slider if the control is set to ON.
4. Use the trackpad to increase or decrease the alarm slider setting. You can
press and hold the trackpad to change the value more rapidly.
5. The higher the setting, the more sensitive the alarm, and the smaller the tar-
get density required to set it off.
6. Press ENTER to clear the slider display.
D3935-3
LIGHT
CONTRAST
ALARM
ON
25%
TUNE
O
F
F
A
U
T
O
50%
81186_3.book Page 22 Thursday, August 22, 2002 8:23 AM