Roadmaster MP320T - Manual

Read First!
Dear Customer,
CONGRATULATIONS.
The MP320T MP3 Player with FM Modulator & Voice Recorder, when used as described, will
enable you to enjoy CD-quality music any place and any time. We have taken numerous
measures in quality control to ensure that your product arrives in top condition and will
perform to your satisfaction. In the rare event that your MP320T MP3 Player with FM
Modulator & Voice Recorder contains a damaged or missing item, does not perform as
specified, requires warranty service or you have an installation problem,
DO NOT RETURN
THIS PRODUCT TO THE STORE. Please call our TOLL-FREE NUMBER 1-800-445-1797
and ask to speak with a member of our technical service team, or submit your questions by
e-mail to [email protected] and a member of our technical service team
will respond by e-mail to your questions. Our in-house technical service team will expedite
delivery of your part, advise you on installation, or help troubleshoot a problem with you. If
your product needs warranty service, our technical service team representatives will help
you obtain the fastest remedy possible under the warranty.
Installation
MP320T
MP3 Player with FM Modulator & Voice Recorder
Setup
System Requirements
• Hardware: IBM PC, Compatible PC, or Notebook Computer with USB interface.
Macintosh Computer, or Powerbook with USB interface
• Operating System: Windows 98/SE, Windows Me, Windows 2000/XP
Mac OS from 9.2 to 10.3.8
Battery Installation
Press on the battery cover and slide towards the
bottom of the player.
Lift battery compartment cover, then insert one
“AAA” - size alkaline battery.
Close the battery cover.
Before Using
The MP3 player is a Plug & Play
TM device under
the WINDOWS 2000/XP/ME Operating System.
But for WINDOWS 98/SE, you are required to
install the driver on the computer first before
connecting the player to the computer.
Insert the included driver CD into the CD-ROM
drive and run the Setup.exe file on it. Choose
the correct model of player to install.
Connecting to a PC or MAC computer
Insert plug “A”, the larger end of the USB cable,
into the PC’s USB port, then insert plug “B”, the
smaller end, into the MP320T’s USB port.
When you open “My Computer” on the PC, or
“Finder” on the MAC, you will see a new
removable disk. This indicates the connection is
successful. You may create or delete folders
and transfer/delete files just as you would any
other storage device.
Features & Functions
• MP3 Player with LCD Display
• Plays MP3 and WMA Files
• USB 2.0 Plug N’ Play ™
• 128 MB Built-In Flash Memory
• Backlit LCD Display
• Requires only one AAA” Alkaline Battery
• EQ Presets; Normal, Rock, Classic, Pop, Jazz and Bass
Parts
Lanyard w/Earbuds
MP3 Player
Windows 98/SE users are required to
install the driver BEFORE connecting
the MP320T to the computer!
• Dimensions: 2.937L x 1.4H x 0.625W - 74.6 mm x 35.56 mm x 15.87 mm