Revox M10 - Manual (Page 21)

M10 Re:system
20
M10 Setup
A PC or a Notebook is always
needed for the initial configuration
of the M10, which is connected to
the M10 using the RS232
interface or the USB socket .
Using the M230 Revox program
of M-Scope (Display view), the
main menu shown below for the
M10 setup can be called with the
setup key.
The Setup menu appears as
follows, if the Multiroom module is
installed:
Ethernet Setup
The Ethernet setup is reached
through the Ethernet softkey. All
the settings that are needed for
the integration of the M10 in a
LAN are done on 2 configuration
pages. The first menu page
shows you a Client List of all
devices that are currently
accessing the M10.