Rosewill RC-219 - Manual (Page 5)

eSATA II 2 port PCIe HDD Controller RC-219 User Manual
5
2.5. Update new driver on Windows NT 4.0
1. After OS boots up, Click 'Start'
2. Under 'Settings', click 'Control Panel'.
3. Select 'SCSI Adapters' from the Control Panel.
4. Select the 'Drivers' tab and click 'Add'.
5. Click 'Have Disk'.
6. Insert the Driver CD in your CD-ROM/DVD drive and press 'Enter'.
7. Choose ' E:\SATA Express_2Port \Sil3132 \ WinXP_2000_2003_NT ' and click
'OK'.
8. Refer to instructions in section 2.4 to verify controller was installed correctly.
2.6. Update new driver on Windows Vista/2000/XP or Windows
Server 2003
1. Right click on 'My Computer' and select 'Properties'. Under the 'System
Properties' section, click on 'Hardware' tab, and then on 'Device Manager' click
'SCSI and RAID Controllers' and right click 'Silicon Image SiI 3132 SATALink
Controller' then select 'Properties' from the context menu.
2. Click 'Driver', 'Update Driver' and select 'Search for a suitable driver for my
device [Recommended]'. Insert the Driver CD in your CD-ROM/DVD drive. Click
'Next' and complete the driver installation.
3. System will go through the enumeration process and install the driver. At the end
of the process, click 'Yes' to reboot your system when necessary.
4. See instructions in section 2.4 to verify controller was installed correctly.
Thank you for purchasing a quality Rosewill Product.
Please register your product at : www.rosewill.com for complete warranty information and future
support for your product.