3 – operating instructions, Controls on display panel, Operating instructions – Raymarine 465 User Manual

Page 36: Fig. 3-1, Press once to turn the power on, Key for a moment, then release it

Advertising
background image

25

Operating Instructions

Fig. 3-1

Display
Panel

PWR

SETUP

CLEAR

465

ZOOM

BOT

LOCK

A-SCP

F I S H F I N D E R

Display
area

Power button

Page control
pad

Setup button

Clear button

Zoom button

A-Scope button

Bottom Lock
button

3 – Operating Instructions

In this section of the manual, we will explain how to operate the unit.
(Setup instructions are included in the next section.) Below is a drawing
of the display unit.

Controls on Display Panel

The FishFinder is designed to be easy to use while the boat is moving.
You can steady your hand by gripping the right side of the display with
the fingers of your right hand. This will allow you to use your right thumb
to press the buttons on the display.

Notice that some of the buttons can be used in two ways. They do one
job during a normal display, and a different job when you are setting up

the unit. In this section, we will use symbols like this –

PWR

and

SETUP

to indicate the buttons on the front of the unit.

PWR

This button turns the power on and off.

To turn on the power

– Press once to turn the power on.

To enter the Lamp/Contrast Menu

– To bring up the

Lamp/Contrast Menu in any operating mode, press the

PWR

key for a moment, then release it.

To turn off the power –

If you press and hold the button,

the display will say “Powering Off.” If you hold the button for
more than 3 seconds, the display unit will switch off.

Advertising