Accessories, Warning, Helpful hints – Ryobi TR30 User Manual

Page 12

Advertising
background image

Page 12

ACCESSORIES

Standard accessories included with your laminate trimmer
are two wrenches and a 1/2 in. (13 mm) diameter flush trim
bit.

The following is a list of optional accessories available for
your TR30 Laminate Trimmer:

Part No.

Description

6072373

Trimmer Guide

4675208

Straight Trim Bit

6072063

Straight Guide

HELPFUL HINTS

✓

Always clamp workpiece securely before trimming.

✓

A safe operator is one who thinks ahead.

✓

Always wear eye protection when trimming.

✓

Make setup adjustments carefully. Then double check.
Measure twice and cut once.

✓

Keep cutters clean and properly sharpened.

✓

Don’t let familiarity make you careless.

✓

Study all safety rules and do the job safely.

✓

NEVER place your hands in jeopardy.

✓

Make certain clamps can’t loosen while in use.

✓

Test difficult setups on scrap — Don’t waste lumber.

✓

Plan each operation before you begin.

✓

Provide for smoother operation by cleaning your
trimmer frequently. Shake trimmer or blow with an air
jet to remove sawdust buildup.

✓

THINK SAFETY BY THINKING AHEAD.

Fig. 10

WARNING:

Avoid hand positions that may expose fingers to cutter
through open areas of trimmer base.

See Figure 11.

Fig. 11

EDGE SHAPING WITH OPTIONAL TRIMMER GUIDE

Advertising