Runco VIDEO XTREME VX-22D - Manual (Page 44)

Installation
30 Runco VX-22d Installation/Operation Manual
PRE
L
IMINAR
Y
Use a Runco DVI Dual-Link (DVI-DL) cable to connect the output of the DHD Controller to
the input of the VX-22d; see Figure 3-10.
Figure 3-10. Connecting the VX-22d to the DHD Controller
II I III
TRIGGERS
RS-232 / 485
WIRED
REMOTE SERVICE ONLY
SYSTEM CONTROL INTERFACE
HD3 (VGA / Y-Pb-Pr) COMPOSITE S-VIDEO
HD2 (BNC)
Vs Hs Pr / R Pb / B Y / G
HD1 (RCA)
Y / G Vs Hs Pr / R Pb / B
HDMI
II I
INPUTS Service port.
Not for user
access
Remove the screw to pull off the lamp cover .
Remove the screw to
pull off the lamp cover.
L
L
SERVICE PORT
AUTHORIZED
PERSONNEL ONLY