Radio Shack AM/FM Stereo Auto Reverse Cassette Recorder - Manual (Page 10)

10
Notes:
• Press PAUSE to temporarily
stop playback. Press PAUSE
again to resume playback.
• Press to fast-forward, or
to rewind the tape to the
desired location.
• Press DIRECTION to reverse
the tape’s direction and play
the other side.
5. Adjust VOLUME MIN/MAX for
the desired listening level.
6. Adjust TONE LOW/HIGH for the
desired sound.
7. Set E-BASS OFF/ON to ON to
emphasize low frequency
sounds. Set it to OFF for normal
bass sound.
8. Press STOP/EJECT to com-
pletely stop playback before it
automatically stops. Press
STOP/EJECT again to open the
cassette compartment and
remove the cassette tape.
RECORDING
You can record from the radio, or use
the built-in microphone to make a live
recording.
Caution:
• Before you load a cassette tape
for recording, be sure its erase-
protection tabs are in place. If
you force down RECORD when
that side’s erase-protection tab
is missing, you can damage the
record mechanism (see “Pre-
venting Accidental Erasure”).
• The SCR-99 records only when
the tape is turning forward. After
loading a cassette tape, press
RECORD to see if the tape is
turning forward. You cannot
press RECORD if the tape is
turning in reverse. If necessary,
press DIRECTION to change
the tape’s direction. Do not force
down RECORD.
Notes:
• The SCR-99’s Automatic Level
Control (ALC) automatically
adjusts the recording level. VOL-
UME MIN/MAX has no effect on
recording.
• To record on the other side of
the tape, remove the tape, turn it
over, and load it again.
14-729.fm Page 10 Wednesday, June 30, 1999 5:27 PM