Operation – Ryobi BE321VS User Manual

Page 15

Advertising
background image

15

OPERATION

WARNING:

To prevent the possibility of sawdust or foreign objects
being thrown into your face and eyes, never attempt to use
the sander without dust bag properly installed. Sawdust
or foreign objects being thrown into your face and eyes
could result in possible serious injury.

DUST BAG

See Figure 10.
The dust bag provides a dust collection system for the sander.
It should be installed over the exhaust hole located on the
side of the sander. For more efficient operation, empty dust
bag when half full.
Do not connect sander to power supply before installing
dust bag.

To install/remove dust bag
n

Unplug the sander.

n

Place the opening of dust bag over exhaust hole of the

sander aligning the notch inside opening of dust bag with
groove on exhaust hole. The bag should be installed with
the zipper down when sander is in upright position.

n

Turn the dust bag counterclockwise to secure in place.

n

To remove the dust bag, turn clockwise and pull off.

To empty dust bag
Remove dust bag from sander, open zipper, and shake out
dust.

Fig. 10

DUST BAG

DUST

EXHAUST

GROOVE

DUST BAG

OPENING

TURN TO SECURE

DUST BAG

WARNING:

Do not use the dust collection bag when sanding metal.
Using the dust collection bag when sanding metal creates
a fire hazzard, which could damage the tool and lead to
serious personal injury.

WARNING:

Collected sanding dust from sanding surface coatings
such as polyurethanes, linseed oil etc., can self-ignite in
the sander dust collection bag or elsewhere and cause
fire. To reduce the risk of fire, always empty the dust
bag frequently (10-15 minutes) while sanding and never
store or leave a sander without totally emptying its dust
bag. Also follow the recommendations of the coatings
manufacturers.

Advertising