Renesas SuperH Family E10A-USB User Manual
Page 48
Advertising
40
(b) Measurement tolerance
•
The measured value includes tolerance.
•
Tolerance will be generated before or after a break.
For details, see table 2.14.
(c) Measurement items
Items are measured in the [Performance Analysis] dialog box for each channel from Ch1 to
Ch4. A maximum of four conditions can be specified at the same time. Table 2.12 shows the
measurement items. (Options in table 2.12 are parameters for <mode> of the
PERFORMANCE_SET command. They are displayed in CONDITION of the [Performance
Analysis] window.)
Advertising
This manual is related to the following products: