Rosen Entertainment Systems A10 - Manual (Page 23)

23
Rosen Entertainment Systems
The Digital Output Setting
There is a setting in the menu for a
Digital Audio output. This unit does not
have a digital audio output. Leave this
setting in the ANALOG mode.
Note: Enabling the Digital Audio
mode disables the analog audio
output used by the FM Modulator
and the IR headphones, and can
resemble a system audio failure.
AUDIO OUT
MAIN PAGE
ANALOG
SPDIF/RAW
-- AUDIO SETUP --
SPDIF/PCM DUAL MONO
LPCM OUT
OP MODE
DYNAMIC
PRO LOGIC
Changing the Aspect Ratio Mode
This is under the GENERAL tab. The
correct setting is WIDE. Changing this
setting to NORMAL/PS or NORMAL/LB
will result in distorted video.
Changing the Video Output Mode
To change the video output mode,
select GENERAL, and then select TV
TYPE. The default is NTSC. If you want
to be able to play PAL discs on your
NTSC monitors, select PAL. If you
change this setting and the picture
“rolls”, see your Rosen dealer.
TV DISPLAY
OP MODE
ANGLE MARK
OSD LANG
MAIN PAGE
NORMAL/LB
WIDE
- - GENERAL PAGE - -
NORMAL/PS
CAPTIONS
SCR SAVER
DISC MENU
SUBTITLE
LOCALE
PARENTAL
- - PREFERENCES PAGE - -
TV TYPE
NTSC
PAL
MULTI
AUDIO
SUBTITLE
Note: The setting “MULTI” will automatically output NTSC
video from NTSC discs, and PAL video from PAL discs.
NTSC is the North American standard. Some discs do
not play properly when MULTI is selected.
DVD TYPICAL SETUP AND CONFIGURATION
The following section explains how to customize various features of
the Internal DVD Player, including various language, display, and
parental control features.
Note: Many DVD menu settings do not apply to this system,
such as the Dynamic setting, since it is specifically engi-
neered for automotive use. Changing the state of some
settings can cause apparent system failure. If you have
questions about the original state of any DVD setting, please
see the list on page 25.
To change the settings for the internal DVD Player:
1 Press SOURCE SETUP.
2 Use the navigation arrow buttons to highlight a selection.
3 Press the ENTER button to confirm your selection.
AUDIO SETUP
GENERAL SETUP
SPEAKER SETUP
PREFERENCES
EXIT SETUP
SETUP MENU -- MAIN PAGE
If you try to perform an action that is not permitted
(such as accessing the Preferences menu while a
disc is playing), this on-screen symbol will appear:
Note: To access the Preferences page, you must completely
stop playback of any loaded disc, or eject the disc completely.