Renesas PROM Programming Adapters PCA7450FP - Manual (Page 11)

( 11 / 18 )
4.3 Mounting an MCU into the Adapter
Be careful when inserting the MCU because incorrect insertion can cause fatal
damage to the MCU.
4.3.1 For PCA7450FP
(1) As shown in Figure 4.3, set the slide bar in the center of the IC socket to the shaded area on the
board.
(2) As shown in Figure 4.3, mount the MCU into the IC socket with the No. 1 pin of the MCU matched
to the No. 1 pin of the IC socket on the PCA7450FP.
Figure 4.3 Mounting an MCU (PCA7450FP)
4.3.2 For PCA7450SP
As shown in Figure 4.4, mount the MCU into the IC socket with the No. 1 pin of the MCU matched
to the No. 1 pin of the IC socket on the PCA7450SP.
Top view
Figure 4.4 Mounting an MCU (PCA7450SP)
Top view