Radio Shack CID-932 - Manual (Page 20)

20
2. Press RECORD and begin speaking immediately after the
beep. RECORDING appears.
3. Record your message within 2 seconds. The CID-932
immediately plays back the message, and displays the
telephone number, then the message
OK? PRESS
RECORD appears.
4. To accept the message, press RECORD again.
If you want to re-record the message, press DELETE, then
repeat the recording process.
If there is already a Voice VIP message for that number,
the CID-932 beeps twice and
ALREADY EXISTS
appears. See “Reviewing and Re-recording Voice VIP
Messages”.
If the VIP Call List is full, the CID-932 beeps twice and
MEMORY FULL appears. You must delete a Voice VIP
message to free a memory location. See “Deleting Voice
VIP Messages” on Page 21.
Repeat the steps above to record another Voice VIP message.
Reviewing and Re-recording Voice VIP
Messages
1. Press VOICE VIP. VIP LIST appears.
2. Repeatedly press REVIEW
8
or
9
to scroll through the
VIP Call list until the desired telephone number appears.
43-932.fm Page 20 Wednesday, January 12, 2000 9:56 AM