Ricoh RDC-i700 - Manual (Page 164)

162
Switching Between the Modem and LAN
This function enables you to choose whether to use the preset card as the
[MODEM] or as the [LAN].
Note
• Use this setting when using a PC card with both modem and LAN
functions. If you normally use a communication card or LAN card, you
do not need to make this setting (the card is automatically detected).
Important
Note
• If you use with a LAN connection and then again with a modem
connection, select [MODEM] in the same operation.
A
Set the mode dial to [SETUP].
The Setup menu will be displayed.
B
Select [MODEM/LAN].
The screen for setting modem or LAN will be
displayed.
C
Select [LAN] and then select [OK].
Note
• To change from LAN to modem,
select [MODEM].
Setting is completed and the screen returns
to the Setup menu.