Runco CR-32HD - Manual (Page 22)

22
1. Press the MENU button on the remote control.
2. Press the
▲▼ buttons to select Setup and then press the ENTER or ► button.
3. Press the ▲▼ buttons to select OSD Language, PC Adjust, Caption, Parental
Control, Letterbox Mode, Input Selection, Monitor Out or Overscan.
4. Press the MENU button to return to the previous menu.
OSD Language
PC Mode Adjust
1. Press the ▲▼ buttons to select PC Mode Adjust and then press the ENTER or
► button.
2. Press the ▲▼ buttons to make the selection.
3. Press the ◄ ► buttons to make the adjustments.
For best results, select 1024 x 768 from your computer output.
Setup
Note:
PC Mode Adjust active only through
RGB input with VESA computer
standards.
> English
Français
Español
Português
Deutsch
Setup
OSD Language
PC Mode Adjust
Caption
Parental Control
Letterbox Mode
Input Selection
Monitor Out
Overscan
PC Mode Adjust
Auto Adjust
H. Position 313
V. Position 34
H. Size 1344
Phase 0
Reset
Setup
OSD Language
PC Mode Adjust
Caption
Parental Control
Letterbox Mode
Input Selection
Monitor Out
Overscan
Runco CR-32HD
Source
Aspect Ratio
Picture Adjust
Audio
Channel
Timer
Setup
ISF Calibration
Setup
OSD Language
PC Mode Adjust
Caption
Parental Control
Letterbox Mode
Input Selection
Monitor Out
Overscan