Radio Shack PRO-528 - Manual (Page 30)

30
Beyond the Basics
previously stored, beginning with
the fi rst stored frequency.
• Press S or T to select a skipped
frequency while HOLD appears.
L/O appears when you select a
skipped frequency.
scanning the stored channels
To begin scanning channels, press SCAN/
MANUAL. The scanner scans through
all non-locked channels in the activated
banks. (See “locking out channels”
and “turning channel-storage banks on
and off”). When the scanner fi nds a
transmission, it stops on it. When the
transmission ends, the scanner resumes
scanning.
Notes:
• If you have not stored frequencies
into any channels, the scanner
does not scan.
• If the scanner picks up
unwanted partial, or very weak
transmissions, turn SQUELCH
clockwise to decrease the
scanner’s sensitivity to these
signals.
Notes