RCA DRC6282 - Manual (Page 18)

17
EN
System setup
1. In STOP mode, press the SETUP button.
2. Press the or button repeatedly until
SYSTEM SETUP appears.
3. Use the or button to select the option (Tv
Display or Default), then press the button.
Use the or button to make adjustments,
then press the ENTER button (The screen will
change to your selected setting).
4. Repeat steps 2 and 3 above to adjust other
options.
5. To exit the SETUP MENU and return to the
normal screen, press the RETURN or SETUP
button.
Tv display
Pan Scan
• When wide-screen video is played, this mode clips
the right and left sides of the image so that it can
be viewed on a conventional screen.
• Some wide-screen DVDs that
do not permit Pan Scan mode
playback are automatically
played in letterbox mode
(black bands that appear at
the top and bottom of the
screen).
Letter Box
• When wide-screen video is
played in this mode on a
conventional screen, black
bands appear at the top and
bottom of the screen.
Wide screen
• This is the correct mode for
playing wide-screen videos
on the unit or other external
wide-screens.
WIDE SCREEN
LETTER BOX
PAN SCAN
Cut off when a wide-
screen video image is
played.
Default
It takes 3-5 seconds to reset the DVD settings to the
factory default.
Note:
• The displayable picture size is
preset on the DVD. Therefore the playback
picture of some DVDs may not conform to
the picture size you select.
• When you play DVDs recorded in the 4:3
aspect ratio, the playback picture will always
appear in the 4:3 aspect ratio regardless of
the TV TYPE setting.