Renesas Pod Probe for 7906 Group MCUs M37906T-PRB - Manual (Page 30)

( 28 / 40 )
Chapter 4. Specifications
4.1 Specifications
Table 4.1 lists the specifications of the M37906T-PRB.
Table 4.1 Specifications of M37906T-PRB
4.2 Electrical Characteristics
The pins of MCU excluding X
IN
, MD0, MD1 and RESET* pins are directly connected to the target
system via the converter board.
Table 4.2 lists the electrical characteristics of the device used for X
IN
, MD0 and RESET* pins.
Table 4.2 Electrical characteristics of X
IN
, MD0 and RESET*
PC4701
M37900T2-RPD-E
7906 Group MCUs
M37906FCCWP (pre-mounted on the M37906T-PRBM)
Single-chip mode
20MHz
Internal oscillator board, switchable to an external oscillator
Approx. 50ns (20MHz)
5 to 35 ° C (no dew)
-10 to 60 ° C (no dew)
Supplied from the emulator main unit
When connecting to the 0.8mm-pitch 42-pin SSOP foot pattern,
possible to connect via the SSOP42B-450.
When connecting to the 1.778mm-pitch 42-pin SDIP foot
pattern, possible to connect via the FLX-42SPB (option).
Emulators
Emulation pod main unit
Applicable MCUs
Emulator MCU
Usable MCU mode
42P2R-A
42P4B
Connection to the
target system
Operating temperature range
Storage temperature range
Power supply to emulation pod
Running
mode
Max. operating frequency
Clock supply
Min. instruction execution time
Symbol Parameter
Max.
-
V
CC
× 0.3
± 0.1
Standard values
Unit
V
IH
V
IL
I
IN
Min.
V
CC
× 0.7
-
-
High level input voltage
Low level input voltage
Input current
V
V
µ A
V
CC
3.0 to 5.0
3.0 to 5.0
0.0 to 5.0