Roland PNC-900 - Manual (Page 29)

23
Mechanism Media-movement method
Acceptable sheet widths 50 mm ~ 305 mm (1-15/16" ~ 12")
Maximum cutting area Width: 280 mm (11")
Length: 24998 mm (984-1/8") (Accuracy assured up to 1600 mm (62-15/16"))
Acceptable paper widths 50 mm ~ 305 mm (1-15/16" ~ 12")
Acceptable paper types High-quality paper
Tools Cutters: carbide
Pens: Water-based fiber-tipped pens, Thick water-based fiber-tipped pens (options) and 32 color plotter
pens (options)
Cutting speed 10 mm/sec ~ 200 mm/sec (When DIP switch SW-8 is at ON: 10 mm/sec - 100 mm/sec)
Blade force 30 gf ~ 200 gf
Mechanical resolution 0.05 mm/step
Software resolution 0.025 mm/step
Distance accuracy Error of less than +/- 0.2% of distance travelled, or 0.1mm, whichever is grater
Repetition accuracy 0.1 mm or less (Excluding stretching/contraction of the sheet,
and provided that sheet length is under 1600 mm (62-15/16"))
Interface Parallel (Centronics compatible)
Serial (RS-232C)
Buffer size 2K byte
Instruction system CAMM-GLIII (mode1and mode2)
Switches Power switch, pen force slider, DIP switches
Control switches SETUP, PAUSE, PEN MODE, ROTATE, TEST, ORIGIN SET,
LED POWER/ERROR LED, SETUP LED, PAUSE LED, PEN MODE LED, ROTATE LED
Power consumption 0.5 A /117 V, 0.3 A / 220 - 230 V, 0.3 A / 240 V
Acoustic noise level [Cutting mode] When DIP switch SW-8 is at OFF: under 63 dB (A)
When DIP switch SW-8 is at ON: under 70 dB (A)
[Standby mode] under 40 dB (A) (according to ISO 7779)
Dimensions 492 mm (W) x 289 mm (D) x 217 mm (H) (19-3/8" (W) x 11-7/16" (D) x 8-9/16" (H))
Weight 8.7 kg (19.2 lb.)
Operating temperature 5 ~ 40
°
C
Operating humidity 35% ~ 80% (non-condensing)
11 SPECIFICATIONS OF PNC-900
, , ,