ROTEL RDV-985 - Manual (Page 4)

4 RDV-985 DVD Player
Figure 2: Front Panel Controls
B
C
A
D
I
F G H E
Figure 3: Display Window Indicators and Functions
DVD
ch Disc
REMAIN
REPEAT TITLE CHAP.
SUB
S
C L
LS
R
RS
1 2 3 4 5
7 8
6 10 11
9
Disc Indicator
Lights when a disc is in the unit. When a DVD
disc is in the unit “DVD” also appears .
Multi-Information Display
Displays time and status information.
Time Selection Indicator
Shows which time display mode is selected.
Function Indicator
Lights when one of the programmable play
functions is selected
POWER button
Turns the unit on or off (standby).
STANDBY indicator
Lights when the power cord is connected and
the unit is on standby. When the unit is turned
on, the STANDBY indicator goes off.
VSS button
Produces a simulated surround effect.
Remote sensor
Receives the signal from the remote control
unit.
Disc tray
Used to load discs.
(OPEN/CLOSE) button
Opens and closes the disc tray.
(PLAY) button
Starts playback. Also, used as a SELECT button
for PBC of Video CDs.
■ (STOP) button
Stops playback.
II (PAUSE) button
Pauses playback.
(SKIP) buttons
Performs skipping a chapter, title or track. Also
used for the page selection of a menu screen
(for DVD).
SHUTTLE knob
Performs rapid advance/reverse playback
operations. Also used for slow-motion play-
back of a picture (for DVD/Video CD).
Resume Indicator
Lights when a location on the disc has been
stored. Play can be resumed at the stored lo-
cation
Chapter, Title, Track Indicator
Displays chapter, title, or track number.
Speaker Indicator
lights during disc playback when sig-
nals are output from the video output jacks.
lights when the VSS function is turned
on.
Linear PCM Indicator
Lights only when the playback disc contains
linear PCM data. This indicator also lights when
an Audio CD is placed in the unit.
Channel Indicator
Displays the currently selected audio playback
format.