Rosewill RC-301 - Manual (Page 4)

3
User Manual 2-Port Serial PCI Adapter RC301
“OK” button to continue.
6.
Click on the finish button to start copying files from driver diskette.
7. Windows 98/95/2000 will automatically restart in order to update the hardware
configuration.
8. Once Windows 98/95/2000 has restarted, you can now connect your external devices to
the PCI I/O card. To install the driver for the external devices, please refer to the external device
user’s manual.
Windows NT 4.0
Make sure Windows NT 4.0 is properly installed into your system first.
1.
Start Windows NT.
2. Insert Windows NT 4.0 driver diskette (disk 2) into the floppy drive.
3. Select “RUN” option in Windows NT.
4. At the “RUN” option, click on the“Browse” button.
5. At the Browse for Folder window:
Select “Floppy (A)”
Double click on the winnt folder
Select NetMosXXX drivers.exe
Click on the Open button
6. Finally, click the“OK” button
7. Follow the instructions to finish up the driver installation. Your system will automatically