RCA D52W23 - Manual (Page 25)

Using the HD Monitor’s Features
Chapter 3 23
4. Choose which device button you would like to set:
Set VCR Channel Lets you set up the channel the HD Monitor tunes to
when you press the VCR button on a separate universal remote.
Set AUX/HD Channel Lets you set up the channel the HD Monitor tunes to
when you press the AUX•HD button.
Set SAT Channel Lets you set up the channel the HD Monitor tunes to when
you press the SAT button on a separate universal remote.
Set DVD Channel Lets Set DVD Channel Set DVD Channel you set up the channel the HD Monitor tunes to
when you press the DVD button.
5. Press the right arrow button to select the choice that matches the way you
have the device connected to this HD Monitor, and press OK.
You can select from the following inputs or channels:
N/A Choose this if you don’t have this particular device connected to the
HD Monitor, or if you don’t want the HD Monitor to automatically tune to the
correct input when you’re using this device.
VID1 or VID2 (Video Input) Device is connected to a VIDEO or
S-Video jack on the back of the HD Monitor and you want the HD Monitor
to tune to a VID input channel when you press the corresponding device
button.
FRNT (Front Video Input) Device is connected to the VIDEO jack on the
front of the HD Monitor and you want the HD Monitor to tune to the front
VID input channel (FRNT) when you press the corresponding device button.
CMP1 (Component Video Input) Compatible component video source,
such as a DVD player or digital TV converter box, is connected to the three
COMPONENT VIDEO INPUT jacks (Y,P
B
,P
R
) on the back of the HD Monitor P
B
,P
R
P
B
,P
R
and you want the HD Monitor to tune to the component video input channel
(CMP) when you press the corresponding device button.
DVI Device is connected to the DVI-HDTV jack on the back of the HD DVI DVI
Monitor and you want the HD Monitor to tune to the DVI input channel
when you press the corresponding device button.
Go back
Preferences
Closed caption
Autotuning
List and Labels
Convergence
...
...
...
...
...
Setup
Press < or > key to select the input
to be used for the AUX/HD key.
Go back
Set VCR channel
Set AUX/HD channel
Set SAT channel
Set DVD channel
VID1...
DVI...
CMP1...
VID2...
Tu
ning
Important Note About Autotuning
The Autotuning feature is confi gured to
work with universal remote controls that are
capable of controlling up to four devices in
addition to the HD Monitor.
The remote that came with your HD
Monitor has only two programmable device
buttons—the DVD and AUX•HD buttons.
In the Autotuning menu, use the options
“Set DVD Channel” and “Set AUX/HD
Channel” with the remote that came with
your HD Monitor. The other Autotuning
options are for universal remotes with
additional device buttons.
How to Set Up the Autotuning Feature
The way you set up the autotuning feature in the HD Monitor’s menu corresponds
to the device buttons on the remote and the way you have each device connected
to your HD Monitor. When you set up autotuning, you’re telling the HD Monitor
what input to tune to when you press the DVD or AUX•HD button on the remote
control.
1. Press MENU (the MAIN MENU appears).
2. Highlight Setup and press OK on your remote control. Setup Setup
3. Highlight Autotuning and press OK. Autotuning Autotuning