ResMed S8 User Manual
Page 17
12
!
CAUTION
•
Do not leave long lengths of air tubing around the top of your bed. They could
twist around your head or neck while you are sleeping.
•
Make sure the area around the flow generator is dry and clean. It should also be
clear of bedding, clothes and other potential blockages.
3
Alter the ramp time if required (see “How to Change the Ramp Time” on page 16).
4
To start treatment, press the
Start/Stop key.
5
Fit your mask as described in the mask user instructions.
!
WARNING
A mask should not be used unless the S8 Escape device is turned on and operating
properly.
6
When ramping begins the LCD will display the word "RAMPING", with the current
pressure indicated as dashes. Each dash is approximately equivalent to 2 cm H
2
O. For
example, 6 dashes represents approximately 12 cm H
2
O pressure.
S
TOP
T
REATMENT
To stop treatment at any time, remove your mask and press the
Start/Stop key.
338223r1.book Page 12 Friday, June 3, 2005 4:16 PM