RoyalTek RCD-3000 User Manual
Page 5
Advertising
English
5
1.5 Navigation Function via BT
To make RCD-3000 Receiver work with your devices, a simple pairing step is required for the first time.
(Please follow the pairing instruction for Blue Tooth from your PDA or PC manufacturer.) To get RCD-3000
into pairing mode, all you need to do is simply switch on the power switch.
Once RCD-3000 is properly set up and connected to your PDA or PC, please refer to your navigation software
guidebook for instruction on navigation operation. RCD-3000 works with all NMEA enabled navigation
software.
Advertising