Roper PXD1000 - Manual (Page 22)

22
•
Graduations have stripes
Possible Cause/Solution:
•
If any of the symptoms described above exist, try reversing the Pixel Clock pins.
The pins which should be swapped will depend on whether the pixel clock is
being driven by the camera (most common) or is driven by the Frame Grabber.
For example, if the camera is driving the pixel clock, try reversing the CAMCLK
pins (pin 65 and pin 15), or if the Frame Grabber is driving the pixel clock, try
reversing the Synthclk pins (pin 57 and pin).