Searching for and storing active frequencies – Radio Shack PRO-66 User Manual

Page 22

Advertising
background image

22

Notes:

• If you make a mistake in Step 2,

Error

appears on the display

and the scanner beeps three times. Simply start again from
Step 2.

• Your scanner automatically rounds the entered frequency to the

nearest valid frequency. For example, if you try to enter a fre-
quency of 151.473, your scanner accepts it as 151.475.

4. Repeat Steps 1 - 3 to program more channels. Or, if you want to

program the next channel in sequence, press

MANUAL

and repeat

Steps 2 and 3.

Notes:

•

VHF band frequencies (30-300 MHz) are found at .005 MHz steps.
UHF band frequencies (300-3000 MHz) are found at .0125 MHz
steps.

•

Without battery or external adapter power, the scanner protects
the frequencies stored in memory for about 60 minutes.

SEARCHING FOR AND STORING ACTIVE
FREQUENCIES

Band Search

A band search lets you search for active transmissions within any one
of the eight pre-programmed frequency bands.

Follow these steps to search for active frequencies.

1. Press

MANUAL

, then

HOLD/BAND

. The scanner displays the previ-

ously selected frequency band for 2 seconds, then automatically
starts searching.

2. To select a different frequency band, repeatedly press

HOLD/BAND

until the desired frequency band appears on the display.

29–54 MHz

137–144 MHz

144–148 MHz

148–174 MHz

406–450 MHz

450–470 MHz

470–512 MHz

806–956 MHz

20-511.fm Page 22 Wednesday, August 4, 1999 2:13 PM

Advertising