Roland Vs-880 - Manual (Page 45)

2. Press [SELECT].
The mixer mode will change to INPUT MIX/TRACK MIX.
At the same time, the display will indicate ÒShift Unlock,Ó
indicating that Shift Lock has been canceled.
■ Easy time adjustment
It is now possible to change only the desired decimal places
of a number that you wish to change, such as when specify-
ing the range for Track Copy or when modifying the time of
a Locate Point.
Example procedure when modifying
a Locate Point
* If a particular Locate Point has not been specified, the dis-
play will indicate Ò- - h - - m - - s - -Ó. In this case, it will
not be possible to move the cursor to the desired digit.
Suppose that you wish to change the time of Locate Point 1
to Ò01h00m00s00Ó.
1. Press [LOCATOR] several times until “LOC Loc1 ✱✱ h
✱✱ m ✱✱ s ✱✱ ” appears (numbers will be displayed in
✱✱ ).
2. Hold down [SHIFT] and press CURSOR[ ].
The cursor will appear at the lowest decimal place.
3. Hold down [SHIFT] and press CURSOR[ ][ ].
The cursor will move. Move the cursor to the desired
decimal place.
4. Rotate the TIME/VALUE dial to modify the number.
5. Press [PLAY(DISPLAY)].
You will return to Play condition.
CONDITION MARKER#
MASTER INPUT TRACK AUX
TIME TIME
48
24
4
0
dB
1 12 2
< If [SHIFT] is held down during an operation >
If [SHIFT] is held down during an operation, the Shift
Lock function will be ignored. For example if you hold
down [SHIFT] and press [SELECT], Shift Lock will not be
turned on when you take your finger off [SHIFT]. The
function of [SHIFT] itself remains in effect, so the mixer
mode will change if you hold down [SHIFT] and press
[SELECT].
Chapter 1 Trying out the expanded functions
45
Chapter 1