RCA AVT-2050 - Manual (Page 6)

2.0 SPECIFICATIONS
Before installing the AVT-2050, please make sure your system meets the
following requirements:
Windows: Minimum Intel Pentium II 450MHz/compatible processor: 400 MHz
or faster.
Windows: Windows 2000/ ME / XP with DirectX 9.0 (or higher) installed.
Minimum 64MB RAM.
CD-ROM drive.
Minimum 8 Mbytes hard disk capacity for installing the drivers.
VGA Card: with capability of displaying Hi-Colors at least and direct draw
support.
Sound Card: full duplex 16-bit sound blaster compatible.
Video Input Devices: S-Video, Composite, YCbCr, or DV input.
Note: The
AVT-2050 connects to any S-video, Composite, YCbCr and DV
video sources e.g. VCR, video camera, or camcorder.
CD-R/W drive or DVD ROM (option for recording CD).
Connectors Description
YCbCr in Jacks composed of 3 RCA female connectors used as video inputs for YCbCr source.
S-Video in 4-pin DIN female connector used as video input for an S-Video source e.g. CCD
camera, S-VHS, Hi-8 and some laserdisc video products.
Video in A RCA female connector used as video input for a composite video source e.g. VCR,
camcorder, LD player, CD-I player, or CD-V player
1394 in & out 4-pin DV connector used as DV input for a DV source (e.g. VCR, camcorder and
computer) plus a 6-pin DV connector output.
Audio in RCA female connectors used as stereo audio inputs.
YCbCr out Jacks composed of 3 RCA female connectors used as video outputs for YCbCr source.
S-Video out 4-pin DIN female connector used as video input for a S-Video source e.g. CCD camera,
S-VHS, Hi-8 and some laserdisc video products.
Video out A RCA female connector used as video input for a composite video source e.g. VCR,
camcorder, LD player, CD-I player, or CD-V player
Audio out RCA female connectors used as stereo audio outputs.
6