Preparation, Installing/replacing the battery – Ricoh TRC-509 User Manual

Page 4

Advertising
background image

4

PREPARATION

INSTALLING/REPLACING THE
BATTERY

Your walkie-talkie uses one 9 volt battery (not sup-
plied) for power. For the longest life and best perfor-
mance, we recommend you use an alkaline battery
such as RadioShack Cat. No. 23-553.

Caution: Use only a fresh battery of the required
size and recommended type.

Follow these steps to install a battery.

1. Slide the battery compartment cover in the

direction of the arrow to remove it.

2. Snap the battery onto the battery connector

inside the compartment. The connector only
fits on the battery one way.

Fig. 1

21-409.fm Page 4 Thursday, August 5, 1999 3:31 PM

Advertising