Radio Shack ET-532 - Manual (Page 14)

14
2. When you hear a dial tone, press
MEMORY , then press the number
buttons for the correct memory
location. The stored number
appears on the display, and the
phone dials the stored number.
Method 2
1. Lift the handset from the cradle
and press TALK so the keypad
and TALK key light.
2. Press SCROLL s/t to search for
the desired stored number. The
selected number appears on the
display.
3. Press ENTER . The phone dials the
stored number.
Chain Dialing
When storing numbers for special ser-
vices (such as alternate long distance
or bank-by-phone), store the service’s
main phone number in one memory lo-
cation and numbers for additional in-
formation in other memory locations.
To chain dial memory numbers, follow
these steps.
1. With the handset’s power on,
press MEMORY and the memory-
location number for the service’s
main number. The numbers
appear.
2. Wait for the service to answer.
Note: If you use pulse dialing to
dial the service, be sure you have
stored a
* (tone) entry in the next
memory location used to send the
additional information.
3. Press MEMORY and the numbers
for the memory location where the
additional information is stored.
The numbers appear.
4. To disconnect the call, press TALK
so the TALK key does not light.
Testing Stored
Emergency Numbers
If you store an emergency service’s
number (police department, fire de-
partment, ambulance) and you want to
test the stored number, make the test
call during the late evening or early
morning to avoid peak demand peri-
ods. Remain on the line to explain the
reason for your call.
43-1032.fm Page 14 Tuesday, August 17, 1999 9:41 AM