Roland Lucina AX-09 User Manual
Page 9
9
D
eu
tsc
h
Fra
nç
ais
Italiano
Español
Por
tug
uês
N
eder
lands
English
If you place your fi nger on the touch controller and move
it to left and right, the pitch will change.
By pressing the modulation bar you can apply vibrato.
Press a button to select the D Beam eff ect.
While you perform, position your hand above the
D Beam sensor and move it slowly up and down.
1
1
2
2
☞
For details, refer to p. 11 in the “Owner’s Manual.”
☞
For details, refer to p. 12 in the “Owner’s Manual.”
For the special tones “VIOLIN” and “TROMBONE,” pressing the modulation bar will
vary the dynamics (expression).
D Beam
Explanation
PITCH
Modifi es the pitch of the sounds you play.
FILTER
Modifi es the tonal character of the sound you play.
ASSIGNABLE
Allows you to assign a desired eff ect. With the factory settings, an eff ect
appropriate for each tone will be applied.
Using the Touch Controller and Modulation Bar
Using the D Beam
When you press a button
so it’s lit, the eff ect listed
in the table below will be
applied.
If you press the lit button
once again, the D Beam
will turn off .