Rosewill RC503 - Manual (Page 4)

PCIe USB 2.0 Card 4+1 Ports RC503 User Manual
4
Hardware Installation
• Turn Off the power to your computer.
• Unplug the power cord and remove your computer’s cover.
• Remove the slot bracket from an available PCIe slot.
• To install the card, carefully align the card’s bus connector with the
selected PCIe slot on the motherboard. Push the board down
firmly.
• Connect the system power source to the board’s power connector.
• Replace the slot bracket’s holding screw to secure the card.
• Replace the computer cover and reconnect the power cord.
Driver Installation
Important: If your system doesn’t boot to Windows properly with our
card installed, check with your system’s manufacturer for the latest
system firmware update.