Roland HPi-6F - Manual (Page 46)

46
Getting Ready to Record
You can record your own performance in order to evaluate your playing, or you can play along with a recorded performance.
2 3 4 5 6
7
1. Select the tone that you want to play (p. 25).
2. Press the [Song] button.
3. Press the cursor up button a number of times until “New Song” appears as the song name in the screen.
4. Press the [Rec] button.
The [Rec] button will light, the [Play/Stop] button will blink, and the HPi-6F will enter recording-standby mode.
If you decide to cancel recording, press the [Rec] button once again.
5. If desired, turn on the metronome (p. 27).
6. Press the [Play/Stop] button.
A two-measure count will be heard (the measure number will indicate “-2” and then “-1”), and then recording will begin.
When recording begins, the [Rec] button and the [Play/Stop] button will light.
MEMO
If desired, you can start recording by playing the keyboard while the HPi-6F is in recording-standby mode; recording will begin the instant you play
the keyboard. In this case, no count will be heard.
7. Press the [Play/Stop] button.
Recording will stop.
If the screen asks “OK to delete Song?”
If you attempt to record a new song without saving your previously recorded performance, the following confirmation message will appear.
If you want to erase the recorded
performance
Choose [OK] and press the [O] button.
If you don’t want to erase the
recorded performance
Press the [×] button, or choose [No] and then press the [O] button.
In this case, save your recorded performance to the Favorites or USB memory (p. 48) before you record the new song.
Recording Your Performance