Ryobi TR31 - Manual (Page 12)

Page 12
ACCESSORIES
Standard accessories included with your laminate trimmer
are two wrenches. A subbase accessory with two handles is
also included.
The following is a list of optional accessories available for
your Laminate Trimmer:
Part No. Description
6072373 Trimmer Guide
4675208 Straight Trim Bit
6072063 Straight Guide
HELPFUL HINTS
✓
Always clamp workpiece securely before trimming.
✓
A safe operator is one who thinks ahead.
✓
Always wear eye protection when trimming.
✓
Make setup adjustments carefully. Then double check.
Measure twice and cut once.
✓
Keep cutters clean and properly sharpened.
✓
Don’t let familiarity make you careless.
✓
Study all safety rules and do the job safely.
✓
NEVER place your hands in jeopardy.
✓
Make certain clamps can’t loosen while in use.
✓
Test difficult setups on scrap — Don’t waste lumber.
✓
Plan each operation before you begin.
✓
Provide for smoother operation by cleaning your
trimmer frequently. Shake trimmer or blow with an air
jet to remove sawdust buildup.
✓
THINK SAFETY BY THINKING AHEAD. Fig. 10
Fig. 11
EDGE SHAPING WITH OPTIONAL TRIMMER GUIDE
WARNING:
Avoid hand positions that may expose fingers to cutter
through open areas of trimmer base.
See Figure 11.