Roland DP-900 - Manual (Page 20)

20
Playing the Keyboard
Changing the beat of metronome
3. Press the [Beat] button.
The currently selected beat will be displayed.
4. Press the [+] or [-] button.
If you press the [+] or [-] button, the beat will change.
If you press the [+] and [-] buttons simultaneously, the beat will go back to
what it was before you changed it.
fig.disp-beat
Stopping the metronome
5. Once again press the [Metronome] button, getting its indicator
to go dark.
The metronome will stop.
■
Changing the Metronome Volume
The volume of the metronome can be adjusted, with eight volume levels
available.
1. Hold down the [Metronome] button and press the [+] or [-]
button.
The currently specified volume will be displayed.
Continue to hold down the [Metronome] button, and press the [+] or [-]
button to sound the metronome, and change the volume.
fig.disp-metrovol
Display beat Display beat
2.2 2/2 6.4 6/4
0.4 Only weak beats 7.4 7/4
2.4 2/4 3.8 3/8
3.4 3/4 6.8 6/8
4.4 4/4 9.8 9/8
5.4 5/4 12.8 12/8
It is not possible to change
the beat during song
playback or recording.
Correspondence between
beat and tempo display
Beat Tempo Value
2/2 =10–125
x/4 =20–250
x /8 =40–500
This is set to “4” when the
instrument is turned on.
When you hold down the
[Metronome] button, the
currently specified
metronome volume will be
displayed.
DP-900_e.book 20 ページ ２００４年１１月２９日 月曜日 午後１２時５８分