RCA VCR VR708HF - Manual (Page 19)

Chapter 2 17
Using On-Screen Menus
4. Enter the output channel of your satellite receiver, usually 03, 04, or video
line input and press MENU. The VCR confirms that it receives all DBS
signals on the specified channel.
5. Press MENU and enter the code for your digital satellite receiver from the
Satellite Receiver Codes list (shown below).
Note: RCA and Proscan satellite receivers operate with either 3-digit or
4-digit channel numbers depending on the model. Please note how many
numbers are entered on your RCA or Proscan satellite receiver before
entering a code number into the VCR’s SAT Setup menu.
6. Turn on your satellite receiver and tune it to channel 100 and then press the
MENU button. Follow the on-screen directions.
Once you have completed the setup, the VCR confirms the satellite receiver
setup is completed.
SAT SETUP
On what channel does
the VCR receive signals
from the SAT receiver?
--
Enter 01-13 or INPUT
Press MENU to cancel
SAT SETUP
Enter the code for your
SAT receiver from the
list in your User's
Manual.
--
Press MENU to cancel
Please turn on your
SAT Receiver and tune
it to channel 100.
Press MENU to continue
Satellite Receiver Codes
Dishnet (Echo) 07
GE 00, 01
Hughes Network 06
Panasonic 02
Philips 08
Primestar 05
ProScan (using 3-digit channels) 00, 01
ProScan (using 4-digit channels) 10, 11
RCA (using 3-digit channels) 00, 01
RCA (using 4-digit channels) 10, 11
Sony 04
Toshiba 03
Note: This VCR may not control all
models of the brands shown.