Raymarine 300 - Manual (Page 87)

Chapter 4: Setting Up the GPS Plotter 4-9
4.4 Plotter Set Up Parameters
The PLOTTER SET UP option allows you to set up the Plotter according to
your system configuration and your personal preferences.
The following table lists the Plotter Set up parameters and their options,
shows the factory default setting and provides a space for you to make a
note of your new default setting. Each parameter is described in the
following subsections.
Table 4-2: Plotter Set Up Parameters
Chart Orientation
The plotter orientation is normally North Up, but can be changed to
Course Up or Head Up if heading data is available. The orientation
modes give the following displays:
Parameter Options
Factory
Default New
Default
CUSTOMISE PLOTTER See below for
details
CHART ORIENTATION NORTH UP
COURSE UP
HEAD UP NORTH UP
WAYPOINT SYMBOLS OFF
ON POINTS
ON ALL ON ALL
WAYPOINT NUMBERS OFF
ON ON
DEFAULT WAYPOINT
SYMBOL Fish, skull,
X or anchor symbol X
HEADING VECTOR OFF, 3 MINS,
10 MINS
INFINITE OFF
COG VECTOR OFF, 3 MINS,
10 MINS
INFINITE OFF
TIDE VECTOR OFF, 10 MINS, 1
HOUR
INFINITE OFF
DATUM SELECTION WGS 84, LOCAL WGS 84
POSITION OFFSET
SETUP OFF
ON OFF