RCA EZ1000PL - Manual (Page 22)

21
Computer system requirements
• Windows Vista™, Windows® 7 or Windows® XP with Service Pack 2 or higher
• USB Port (2.0 recommended)
• Internet Access (broadband recommended)
• 16-bit color video card
• Mac®: Mac OS® X version 10.4.11 or later.
PC Hardware:
• Pentium 4, 2.4 GHz or better
• At least 1GB system RAM (2GB recommended)
• Video card with 64 MB of RAM (128 MB recommended)
Connecting to a PC
1. Connect the supplied USB cable to the connection jack. USB connector standard: mini-B
2. Connect the other end of the cable to the computer.
Lift up the cover
USB port of
your computer
USB cable
3. Windows: The first time you connect the camcorder to the PC, the Small Wonder will mount as a drive
letter. To access the Memory Manager 3 installer, open My Computer and double-click the drive labeled
SMALLWONDER. Double-click MemoryMgr3_Windows_Installer.exe to start the installation.
• The RCA Detective application is installed with Memory Manager 3 and will automatically run the
Memory Manager 3 application when your camcorder is connected to the PC.
Mac: The first time you connect the camcorder to the Mac, the Small Wonder will mount as a drive. To
access the Memory Manager 3 installer, double-click the drive labeled SMALLWONDER. Double-click the
RCA Mac Installers.dmg folder. Double-click the MemoryMgr3 Mac Installer to start the installation.
After the Memory Manager 3 installation has completed, double-click RCA Detective Installer to install
the RCA Detective, which will automatically run the Memory Manager 3 application when your
camcorder is connected to the Mac.
Managing videos on your computer
• Camcorder cannot record while connected to the PC.
• Memory Manager is proprietary software licensed by Audiovox Corporation.