Cdx e, Aux m – Rockford Fosgate RFX8220 User Manual

Page 24

Advertising
background image

– 45 –

Magazine Eject

1. Press the EJECT button to release the magazine

disc from the CD changer

2. The source unit will revert to TUNER mode

NOTE: A disc may be ejected during any mode or if

the radio power/ignition is off

LCD Display

1. The LCD will display NO CD

CD Changer Reset

Press the RESET button if the changer gets jammed
during operation

– 44 –

CDX E

JECT

/R

ESET

RESET

AUX Mode

1. Press the MODE button until AUX is displayed

2. The AUX input will immediately "see" the

auxiliary audio input being fed into the AUX
RCA jacks

LCD Display

1. AUX will be displayed for 5 seconds

2. After 5 seconds the LCD will revert to the

default display

NOTE: The input signal connected to the AUX

RCA jacks is fed into the source unit prior
to the volume control. If the AUX input
source has a constant (non-adjustable) out-
put level, the volume control on the face-
plate can properly adjust the amplitude.
The maximum signal the AUX circuit can
accept without clipping is 2.4V RMS.
More than 2.4V RMS input voltage can be
applied to the circuit, however the signal
will be clipped (producing gain overlap).

AUX M

ODE

*

*Feature available on RFX8230 only

TUNER

CDP
CDX
AUX

A

UXILIARY

O

PERATION

Advertising
This manual is related to the following products: