BAUKNECHT DST 6460 ES - Manual (Page 17)

GB15
Remove all components from their packages. Check that they are all present.
•
Assembled hood with motor, lamps, and grease filter installed
• Assembly and user instructions
• 1 Installation template
• 1 Hood support bracket
• 4 x 8mm Ø wall plugs
• 4 x 5mm Ø x 45mm long screws
• 7 x 3.5mm Ø x9.5mm long screws
• 2 washers
• 1 - Torx T10 adapter
• 1 - Torx T20 adapter
The hood has been designed to be installed as a "Filter Model".
Filter model
The air is filtered through one or more the carbon filters, and then resent into the room.
IMPORTANT: Ensure appropriate air circulation around the hood (carefully follow the instructions on the installation manual).
NOTE: If the hood is supplied without carbon filters, these must be ordered and fitted before the hood can be used.
Preliminary information for the installation of the hood:
Before performing any electric connections, disconnect the hood from the general distribution board of the house. The hood comes with fixing plugs suitable for
most types of walls/ceilings. However, ask a qualified technician to check that the items supplied are suitable for the actual type of wall/ceiling.
IMPORTANT: The wall/ceiling must be strong enough to support the weight of the hood.
Remove the grease filter/s.
side cabinets side cabinets
central line
65 cm (gas or mixed cookers)
50 cm (electric cookers)
hob surface
600 mm
ITEMS SUPPLIED
INSTALLATION - PRELIMINARY ASSEMBLY INSTRUCTIONS
INSTALLATION SIZES