Other settings, H-activity on/off, L9 function – Roland cakewalk A-800PRO User Manual
Page 69: H-activity on/off l9 function, L9 function” (p. 69), P. 69
![background image](/manuals/198114/69/background.png)
69
System Settings (EDIT Mode)
Turn this On when using certain applications (such as Pro Tools LE). If this is On, the
message “90 00 7F” will be transmitted to “A-PRO 2” at intervals of approximately 500
ms.
1
Simultaneously press the [ACT] button and the [
] button.
2
Use the [VALUE] knob to select “SYSTEM SETTING,” and press the
[ENTER] button.
fig.lcd-HACTVTY.eps
3
Use the [VALUE] knob to choose
“H-ACTVTY ON/OFF,” and press the
[ENTER] button.
fig.lcd-HACTVTY1.eps
4
Use the [VALUE] knob to specify
either “ON” or “OFF.”
5
Press the [ENTER] button.
This specifies the function of the [HOLD] button.
1
Simultaneously press the [ACT] button and the [
] button.
2
Use the [VALUE] knob to select “SYSTEM SETTING,” and press the
[ENTER] button.
fig.lcd-L9FUNC.eps
3
Use the [VALUE] knob to choose “L9
FUNCTION,” and press the [ENTER]
button.
fig.lcd-L9FUNC1.eps
4
Use the [VALUE] knob to specify the
function of [HOLD] button.
5
Press the [ENTER] button.
Other Settings
H-ACTIVITY ON/OFF
L9 FUNCTION
Value
Setting
Explanation
1
L9
Any desired MIDI message can be assigned to the button.
2
HOLD
The button will allow the sound to continue even after you
take your hand off the pad.
3
VLINK
The button will operate as a V-LINK ON/OFF button.
A-300_500_800C_e.book 69 ページ 2010年2月22日 月曜日 午後9時13分