RTS CLD Color Keypanel Family KP 32 CLD - Manual (Page 83)

77
7. Press the SEL button.
1kHz Tone and 500Hz Tone appears in the display window.
8. Using the 3( ↑) or 6(↓), select 1KHz Tone.
OR
Using the 3(
↑) or 6(↓), select 500Hz Tone.
A blue arrow appears next to the selected option and the 500Hz or 1KHz icon displays in the display
window.
Audio Options Menu, Preamp Out
Preamp Out allows the user to choose how audio is routed to the Preamp Output connector. When Switched is selected,
keypanel audio is routed to the preamp output connector when a talk key is latched. When Hot Mic is selected, audio is always
available at the preamp output connector. When Disabled is selected, keypanel audio is isolated from the preamp output
connector.
NOTE: The GPI 32 CLD option card must be installed for the Preamp Out menu item to appear.
The selections available are: Disabled, Hot Mic, and Switched (default).
To configure the preamp output connector, do the following:
1. On the KP 32 CLD keypad, press MENU.
The Top Level menu appears.
2. Using the 3( ↑) or 6(↓), select Audio Options.
3. Press the SEL button.
The Audio Options submenu appears.
4. Using the 3( ↑) or 6(↓), select Preamp Out.
5. Press the SEL button.
Disabled, Hot Mic, and Switched appears in the display window.
6. Using the 3( ↑) or 6(↓), select Preamp Out option you want.
7. Press the SEL button
FIGURE 68. Audio Options - 1KHz and 500Hz
FIGURE 69. Audio Options - Preamp Out