Renesas R8C/17 - Manual (Page 14)

14
2.3 USB driver installation
Connect the E8 emulator using the USB cable to the USB port of host machine.
<Windows XP>
Installation procedures are described below.
If the E8 emulator is connected, it is recognized as a new hardware.
Click “Next” after selecting “Install the software automatically”.
Click “Continue”.
Microsoft has advocated authentication of the USB drivers to the USB vendors in the Microsoft®
Windows® XP and Windows®-based operating systems released after Microsoft® Windows® XP.
This is aimed at elimination of illegal drivers and improvement of security of PC.