Riccar SUPRALITE RSL3 - Manual (Page 6)

0 
Vacuum Features
On/Off Switch
NOTE: There are three different on/off switch
configurations depending on the model you
own. Identify your vacuum cleaner model and
see the corresponding on/off switch operating
instructions below.
RSL1A – On/Off switch on base:
Locate the switch on the back side of the nozzle
to the left of the handle tube (see figure 0).
Simply press the switch with your foot to turn
the vacuum on or off.
Machine should be turned off before returning
handle to full upright position. Always turn the
vacuum cleaner off before unplugging it from the
electrical outlet.
RSL3 – On/Off switch on handle:
Locate the switch on the top of the vacuum
handle. Using your thumb, push the switch
forward to turn the machine on and pull
the switch backward to turn the machine
off (see figure ).
Machine should be turned off before returning
handle to full upright position. Always turn the
vacuum cleaner off before unplugging it from the
electrical outlet.
RSL4 – On/Off two speed switch on handle:
The switch for this model, located on the
vacuum handle, is a three-way switch. The
middle position is the off setting, the rear
position is the on setting and the forward
position is for maximum power (see figure 2).
Use the maximum power setting when cleaning
carpets and the on setting for cleaning bare
floors and throw rugs.
Fig. 0
Fig. 
Fig. 2
Vacuum Features
On/Off two speed switch on handle cont.
Pull the switch backward to turn the vacuum on.
Push the switch halfway back to turn the vacuum
off. Push the switch all the way forward to use the
maximum power setting.
Machine should be turned off before returning handle
to full upright position. Always turn the vacuum cleaner
off before unplugging it from the electrical outlet.
Edge Cleaning
The edge cleaning feature provides improved cleaning
of carpets near walls and stationary furniture. For
maximum edge cleaning, place the left side of the
nozzle against the wall or stationary furniture.
Automatic Carpet Height Adjustment
Your SupraLite vacuum is designed with an automatic,
self-adjusting nozzle. No manual adjustments are
required. The height of the nozzle is instantly and
automatically adjusted to the flooring surface. This self-
adjusting feature allows the nozzle to float evenly over
all flooring surfaces.
Bare Floor Cleaning - Model RSL4 Only
The RSL model SupraLite comes equipped with a
squeegee on the bottom of the vacuum to improve its
effectiveness in cleaning bare floors. When cleaning
tile, hardwood, linoleum, etc., use the on setting,
as opposed to the maximum power setting, for
best results. (See figure 3)
Fig. 3