Roland AT800 - Manual (Page 121)

121
Using the Registration Buttons
Using the Registration Buttons
4.
Repeat steps 2 and 3 to successively recall the Registration
sets. Instead of performing step 3,
you can also load the
Registration by touching <OK>
in the screen.
Checking the next Registration set
1.
Access the Main screen.
fig.00-06.eps
2.
Touch < > icon several times to switch to < > (Regist).
The Main screen display will switch to the Registration.
fig.03-23-2.eps
“Next” will indicate the name of the next Registration set.
AT-800_e.book 121 ページ ２００８年１０月１５日 水曜日 午前９時３７分