RCA VR708HF - Manual (Page 26)

24 Chapter 2
Using On-Screen Menus
Auto Play
With Auto Play turned ON (the factory default setting), the VCR automatically
starts playback when you insert a tape with the safety tab removed.
To Access Auto Play:
1. In the PREFERENCES menu, press 2 repeatedly to switch between Auto
Play: ON and OFF.
• Select ON if you want a tape with its safety tab removed to start playing
automatically when inserted.
• Select OFF if you do not want a tape with its safety tab removed to start
playing automatically.
Auto TV/VCR
To control whether the VCR’s TV/VCR setting changes automatically to VCR-
viewing mode when turned on, use the Auto TV/VCR setting.
To Access Auto TV/VCR:
In the PREFERENCES menu, press 3 repeatedly to toggle between Auto TV/VCR:
ON and OFF.
Note: Pressing the TV•VCR button on the remote control will switch
between VCR and TV-viewing modes. When in VCR-viewing mode, VCR is
displayed on the front panel. The VCR indicator turns off when in TV-
viewing mode.
• Select ON to switch VCR-viewing mode on automatically when the VCR’s
power is turned on. The VCR must be connected to the TV using the
supplied RF coaxial cable for this feature to work.
• Select OFF to remain in the TV-viewing mode when the VCR is initially
turned on. Leaving Auto TV/VCR off is useful if you use A/V cables to
connect the VCR to the TV and you watch the VCR’s picture using the TV’s
Video Line Input. This way, the antenna/cable signal will not be interrupted
by the VCR.
PREFERENCES
1 Remote Control: VCR1
2 Auto Play:
ON
3 Auto TV/VCR: ON
4 EnergySaver: 2:00
5 Front Panel: AUTO
6 Tape Speed: SLP
7 Set Auto Repeat
8 COMMERCIAL ADVANCEE
0 Exit
The PREFERENCES menu
allows changes to be made
to a variety of different VCR
features.