Radio Shack PRO-95 - Manual (Page 61)

Tr
unk
in
g
61
1. Press PGM then TRUNK .
2. For each bank you want to
program, repeatedly press
FUNC . Then

or

to
select the bank.
3. Press FUNC . Then press 8 .
Block 0 size code. Use 15 for type
II. S—00
appears.
4. Enter the size code supplied
with the Type I system
information, referring to the
instruction that appears on
the display. If the information
was not supplied, try the
following common fleet maps.
Block Size Code
1 2 3 4 5 6 7 8
0 S11 S4 S4 S12 S4 S3 S10 S1
1 S11 S4 S4 — S4 S10 S10 S1
2 S11 S4 S4 S4 S12 S4 S11 S2
3 S11 S4 S4 S4 — S4 S4 S2
4 S11 S4 S4 S4 S4 S12 S4 S3
5 S11 S4 S4 S4 S4 — S4 S3
6 S11 S4 S12 S4 S4 S12 S4 S4
7 S11 S4 — S4 S4 — S4 S4
9 10 11 12 13 14 15 16
0 S4 S0 S4 S0 S3 S4 S4 S3
1 S4 S0 S0 S0 S3 S3 S4 S10
2 S0 S0 S0 S0 S11 S10 S4 S10
3 S0 S0 S0 S0 S4 S4 S11 S11
4 S0 S0 S0 S0 S4 S4 S11 S0
5 S0 S0 S0 S0 S0 S4 S0 S0
6 S0 S4 S0 S0 S0 S12 S12 S12
7 S0 S4 S0 S4 S0 — — —