SOLAC DH 8935 - Manual (Page 9)

MAIN COMPONENTS 9
en
2 MAIN COMPONENTS
1 Tank full indicator
2 Pilot light to indicate operation
3 ON/OFF button
4 Air intake grille
5 Air outlet grille
6 Removable water tank
7 Water tank outlet
8 Carry handle
9 Float
10 Connector for the adapter
11 Adapter
3 OPERATION
1 Connect the adapter to the connector in the device (10) and then
connect it to the mains using the other end (Fig.1).
2 Select the ON position on the ON/OFF switch (3), the pilot light will light
up, indicating that the device is operating (2).
3 The mini-dehumidifier will start to operate. Under conditions of 80%
humidity and 30% temperature, the unit is capable of collecting 300 ml
of water in 24 hours.
4 To turn the device off, select the OFF position on the ON/OFF switch (3).
5 To move the fan to a different place, use the carry handle (8)
Extraction of water from the water tank
)
When the water tank is full (its maximum capacity is 1500 ml) the device
will stop and the full tank indicator (1) will light up.
• Turn the device off and remove the water tank (6), empty its contents
through the water tank outlet (7) (Fig. 2). Next, put the empty water tank
back in the device. If the water tank is not positioned correctly, the full
water tank indicator (1) will light up, warning that it must be positioned
correctly.
4 CLEANING AND MAINTENANCE
n
Your appliance must be disconnected from the mains before any
cleaning operation is performed.
1 Clean the device with a slightly damp cloth to remove any dust or stains.
Use a brush to remove any dust that is accumulated in the air inlet (4).
2007-01-18 DH8935.book Page 9 Friday, March 2, 2007 11:56 AM