Rosewill RRC-126 - Manual (Page 4)

MCE Remote Control RRC-126 User Manual
3
Features ：
RRC-126 Remote Control
1. Microsoft ® Windows ® MCE certification and Green Button support
2. With all of the buttons and functions necessary for Microsoft ® certification, including official
Green Button.
3. Small USB dongle style receiver
4. Use standard Microsoft ® drivers, no software to install.
5. It could wake the system from S1 or S3
6. Infrared Rays Frequency ：38KHz；Infrared Rays transmission distance：7~10 meter
IR605/A Receiver
1. Receiver with USB Port, it’s easy to connect with your computer
2. Support one indication LED for the system level interaction
3. Use in-box Windows® drivers
4. RC6 and MCIR keyboard protocols are supported
5. It could wake the system from S1 or S3
6. It consumes around 1.5mA in sleep mode
Package Contents
： System Requirements ：
z Media Center Remote Controller (RRC-126) x 1
z Receiver IR605/A (USB Port) x 1
z User’s Manual
z AAA battery x 2
z USB cable x 1 (optional)
z Intel® Pentium® 1GHz CPU or faster
z 512MB RAM or above (1G recommended)
z Desktop or laptop computer running Windows®
Vista Home Premium or Ultimate
z USB Port; PC platform
z Graphics card capable of DirectX9
Installation and Operation ：
1. Battery Installation -- Open the battery cover of the Remote Control and install 2 AAA batteries
correctly.
2. Receiver Installation -- Plugging IR605/A receiver (with USB Port on it) into the USB port of your
computer.
(Optional) If your package comes with a USB cable, you can use the USB cable to bridge between
your USB port and the IR605/A Receiver and then put the IR605/A Receiver in front of you to get a
better signal transmission.
3. Operation -- Before you start to use it, please make sure the distance between RRC-126 Remote
Control and IR605/A receiver is under an effective range and the Remote Control aim at the IR
receiver. You can use your Remote Control by pressing any key you want.