Roberts Radio CR9946 - Manual (Page 10)

9
Checking the Alarm Times
1. To check alarm 1 time, set the Alarm 1 function switch to the 'Adj'
position. Alarm 1 time will appear in the display.
2. Return the Alarm 1 function switch to the 'Off' position. The
display will revert to showing time.
3. To check alarm 2 time, set the Alarm 2 function switch to the 'Adj'
position. Alarm 2 time will appear in the display.
4. Return the Alarm 2 function switch to the 'Off' position. The
display will revert to showing time.
Note: Incorrect display will result if both the Alarm function switches
are set to the 'Adj' position.
1
2
3
4
cr9946 instruction book.PMD 4/19/2004, 4:49 PM 10